|
Post by Shneeb108 on Sept 4, 2018 16:32:03 GMT
That's actually very interesting that the TM and Logi both are working fairly well with the same basic set up.
|
|
|
PC2Tuner
Sept 4, 2018 17:41:59 GMT
via mobile
Post by XRF HammerPH on Sept 4, 2018 17:41:59 GMT
What wheel do you have Rob? With my TX I have pretty much settled on the SimRacingGirls wheel settings, been using them for a couple of months now and find them very good. Thrustmaster TX... I tried her settings but it just felt too heavy and dead for me. Try out the ones I posted above and let me know what you think. I am going through career races in the BMW 320 (E90) TC and the feed back I get now seems to communicate what the car is doing better than previous settings and has enabled me to make less mistakes (I can usually catch the back end before it passes the front end, usually) I'll give it a go next time I'm on. I am very happy with TSRG's though
|
|
|
PC2Tuner
Jan 30, 2019 16:28:12 GMT
via mobile
Post by XRF HammerPH on Jan 30, 2019 16:28:12 GMT
|
|
|
Post by Uncle De4dly (Ian) on Feb 4, 2019 2:58:08 GMT
I’ve just read thru it - have tuned a couple cars and I’m a bit faster but much more stable - quite sure I can do more but it’ll take a while. Really liking the program.
|
|
|
Post by hurtmagurt on Mar 2, 2019 20:03:34 GMT
So I've pulled the trigger on this even tho i'm sure I'll be in over my head. Might post a few questions along the way. But first off are you always using UDP 1 when using PC2 Tuner?
|
|
|
PC2Tuner
Mar 2, 2019 20:08:25 GMT
via mobile
Post by XRF HammerPH on Mar 2, 2019 20:08:25 GMT
So I've pulled the trigger on this even tho i'm sure I'll be in over my head. Might post a few questions along the way. But first off are you always using UDP 1 when using PC2 Tuner? I do but you don't have to.. it depends if it causes you problems. I know Ian had issues using 1 and I think he now uses 5. Make sure to use pCars 2 protocol though, which does mean you can't use it at the same time as rsDash.
|
|
|
Post by hurtmagurt on Mar 2, 2019 20:27:59 GMT
So I've pulled the trigger on this even tho i'm sure I'll be in over my head. Might post a few questions along the way. But first off are you always using UDP 1 when using PC2 Tuner? I do but you don't have to.. it depends if it causes you problems. I know Ian had issues using 1 and I think he now uses 5. Make sure to use pCars 2 protocol though, which does mean you can't use it at the same time as rsDash. Ok. I'm not sure if mine is working. When you open the analysis tab and go out on track, should the graphs be populating immediately?
|
|
|
PC2Tuner
Mar 2, 2019 21:11:20 GMT
via mobile
Post by XRF HammerPH on Mar 2, 2019 21:11:20 GMT
You should see something fairly quickly. Definitely it should have start by the time you start your first flying lap.
Check out the manual I posted a link to a few posts earlier and make sure you have everything set the way it says. You are on pCsrs 2 protocol and not pCars1?
|
|
|
Post by Uncle De4dly (Ian) on Mar 2, 2019 21:15:44 GMT
Also the Xbox ports need to be open, which yours obviously must be (port forwarding in your router assuming everything is connecting wireless).
As well you have to run a windows PC, it won’t work under a virtual machine on a Mac and presumably anything else as near as I can tell though I’ve only tried for a day.
Last thing in my opinion - read the manual or you won’t get all out of it that you can.....as evidenced by my skillful displays of racecraft and blindingly fast lap times......
Lol - seriously though I know for me it’s made a huge difference in stability of the vehicle. Case and point in Tyler’s video from the 2nd to last TC session I was completely out of control downshifting and braking and did the death slide into Stormtrooper I believe - for the next week I tuned the car and voila....no issues with control. Now just to work on speed and strategy and skill set when all you crazies are flying past me......
|
|