|
|
Post by XRF HammerPH on Dec 23, 2019 9:21:22 GMT
My setup. Recently added the Ricmotech sequential upgrade, it's great. Also my home made button box using the directions another forum user posted. My tablet runs RsDash which works ok on project cars and F1, and Crew Chief which is audio only spotter for project cars. Nice one Greg. Looks very impressive. Particularly like the button box and rsDash tablet. I will get around to one of those button boxes at some point.. Funds have been too tight for a while now to spend any extra cash on my racing so i'll make do with my keypad version for now but definitely like the more professional looking way you have it all set up. The shifter was going to be the next outlay I was looking to make but with my wheel itself now being 3 years old I am a bit wary that it could be coming towards the end of it's lifetime so have refrained from any significant outlay on other peripherals. |
|
|
|
Post by Dale Rossi on Dec 23, 2019 13:38:03 GMT
Some nice rigs in here! Hope to have a dedicated spot again, would make a huge difference.
Fanatec Clubsport 2.5
Clubsport rim 330mm, Podium rim 300mm, and Formula v2 rim
Clubsport pedals v3
Clubsport Sequential shifter 2.5
Had the handbrake, but it was too much for not having a permanent rig
73" HDR 4K
Sennheiser GSP 500 headset
Recliner that's usually 13' back and at an angle, or right in front of the screen when the woman is out of town.lol
|
|
Joeri
Semi Pro
Posts: 72
Console Type: Xbox
Gamertag: joeriRSD
Location: Noord-Brabant, Netherlands
|
Post by Joeri on Mar 7, 2020 10:47:55 GMT
Hi guys, As discussed in the WEC series topic, just switched to a Sim-Lab setup as my old Rseat wasn't a perfect fit for me (1.67cm). Set-up
Rig: Sim-Lab GT1-EVO Black Seat: Mirco GT seat Wheeldeck: Fanatec CSW 2.5 (outside is an CSW2.0, but hardware is 2.5) Wheel: Fanatec Formula V2 Pedals: Heusinkveld Sprint Screen: Samsung LC49HG90 49inch widescreen Sound: Logitech Z906 I have it all hooked up with a Drivehub to the Xbox. Hopefully the new Xbox series X will support 32:9 screen ratio    This was my initial set-up with the Rseat rig, which I sold last week.  |
|
|
|
Post by XRF Lemarrrr on Mar 7, 2020 11:08:27 GMT
Hi guys, As discussed in the WEC series topic, just switched to a Sim-Lab setup as my old Rseat wasn't a perfect fit for me (1.67cm). Set-up
Rig: Sim-Lab GT1-EVO Black Seat: Mirco GT seat Wheeldeck: Fanatec CSW 2.5 (outside is an CSW2.0, but hardware is 2.5) Wheel: Fanatec Formula V2 Pedals: Heusinkveld Sprint Screen: Samsung LC49HG90 49inch widescreen Sound: Logitech Z906 I have it all hooked up with a Drivehub to the Xbox. Hopefully the new Xbox series X will support 32:9 screen ratio This was my initial set-up with the Rseat rig, which I sold last week. Looks great mate, but are you any faster in it? 🤣 |
|
Joeri
Semi Pro
Posts: 72
Console Type: Xbox
Gamertag: joeriRSD
Location: Noord-Brabant, Netherlands
|
Post by Joeri on Mar 7, 2020 11:13:43 GMT
Looks great mate, but are you any faster in it? 🤣[/quote] Will see today! But the seating position feels much better already. Doing cable work now and jump in a test session in an hour or 2. |
|
|
|
Post by XRF Formula1 on Mar 7, 2020 19:31:46 GMT
Very cool Joeri!👍 I'm envious of your rig. Yeah, it's too bad Xbox doesn't support that screen you've got or triple screen setup because that's supposed to be better than one big screen like me and a few others from here use.
|
|
|
|
Post by hurtmagurt on Mar 8, 2020 17:30:56 GMT
Super clean great setup joeri. So you can use any pedals hooked thru a fanatec wheel on xbox? I did not know that. I have a little adapter box I use to have fanatec pedals on my thrustmaster wheel.
|
|
|
|
Post by Dale Rossi on Mar 8, 2020 18:34:42 GMT
Really nice setup for sure!
"Patiently" waiting to see if next gen will support this kind of monitor or even triple screens. Really want to get setup in a permanent spot. Hopefully they'll release the info fairly soon.
|
|
Joeri
Semi Pro
Posts: 72
Console Type: Xbox
Gamertag: joeriRSD
Location: Noord-Brabant, Netherlands
|
Post by Joeri on Mar 9, 2020 6:49:13 GMT
Super clean great setup joeri. So you can use any pedals hooked thru a fanatec wheel on xbox? I did not know that. I have a little adapter box I use to have fanatec pedals on my thrustmaster wheel. thank you! Unfortunatelly that's not possible, but some guys created a DriveHub, where you connect your wheel, pedals and xbox controller. Take a look on the website, it's a really great device for console racers DriveHub |
|
liamatkin
Racer
Posts: 42
Console Type: Xbox
Gamertag: Liamatkin23
Location: UK
|
Post by liamatkin on Mar 22, 2020 19:06:41 GMT
Anyone got any advice on why my g920 wheel on the Xbox one has all of a sudden decided to not replicate the input I put in on the wheel. The wheel on the game is hardly turning. I’ve recalibrated it all, the settings appear correct it’s driving me mad trying to figure it out I’m lost what to do next.
|
|
|
|
Post by micko39 on Mar 22, 2020 19:16:31 GMT
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 25, 2020 15:18:54 GMT
new to the forum but let's share the setup anyway... Logitech G920 with Shifter and Pedals clamped to a pizza table (because of money lol) Xbox One S 32 inch Polaroid HD TV I'm a casual racer that has been into video games since I was 5, but as a student, I've been working more and more with school and less and less with Xbox for obvious reasons. [EDIT] forgot to mention a custom made F1 style front wing shelf above the TV with IKEA strip lights connected to Alexa. Not strictly relevant but im sure it knocks off a few tenths somewhere |
|
|
|
Post by Paulo Reis on Mar 26, 2020 12:47:11 GMT
Hello Im Paulo reis from Portugal but living in belgium and this is wat i use for fun my weel base after the original weel base from Xbox 360 ...
Playset home made
Momo seet Alfa Romeo
Fanatec 2.5
Maclaren GT3
Pedals CLS elite
Trurtle beach 520
PS sory my English ..kkk
|
|
|
|
Post by iang0355 on Apr 9, 2020 13:25:03 GMT
Good morning/afternoon to you all in your parts of the world! I posted a picture of a drawing I had made in the IndyCar league signups, but i feel like it'd be better to continue this here. I was looking into getting a wheel plate/rim mod from Acelith, but with the combo of coronavirus and Italians getting their asses kicked by said coronavirus, that won't be able to happen anytime soon so I decided to try and make my own formula style rim. Absolutely LOVE the Sparco wheel I normally use but it does sit right in my line of sight for a lot of the info I need in project cars, and after testing last night this completely remedies that. Ain't the prettiest thing but I'd say it's pretty good for about 9 hours with a grinder, some foam and electrical tape! It's not as pretty as the Acelith I was looking at or in general really but it gets the job done. I'm going to paint it and see if I can have some proper grips made for it in the next couple weeks, a good friend from high school likes to make knives for a hobby (watches too much of that Forged in Fire show but he makes some neat stuff) and I'm gonna see if he'd be up for it. The rest of my setup and a photo of it is as follows: TX motor/base Sparco R383 rally mod wheel TH8A shifter for H-pattern and occasionally sequential shifter cars T3PA-PRO pedals Homemade rig (I call it the PRS-9000, aka the Polish racing simulator 😂) LG 32" TV/monitor An eBay special bucket seat from a buddy's old civic, and a currently non-functioning custom made handbrake for rally and/or drifting. Needs to be rewired, that involves major surgery and a bit of soldering to fix though, and I don't use it much so the hell with it for the time being.   |
|
|
|
Post by Dale Rossi on Apr 9, 2020 15:31:25 GMT
That's really cool, Ian. Having a real seat would be great!
Eventually we need to sort out who has H shifters. Would be fun to set something casual up just for the hell of it. I love mine, but don't get to use it as much as I'd like.
|
|
|
|
Post by iang0355 on Apr 9, 2020 21:38:38 GMT
That's really cool, Ian. Having a real seat would be great! Eventually we need to sort out who has H shifters. Would be fun to set something casual up just for the hell of it. I love mine, but don't get to use it as much as I'd like. Thanks, dude! The rig itself isn't half bad, but that seat just sucks. After about an hour I start getting sore from sitting in it. It would be fun to do like a street or super car day on one of the point to point tracks, or just a trackday type thing in general. Something along those lines sounds like a good time |
|
|
|
Post by Dale Rossi on Apr 10, 2020 19:23:34 GMT
That's really cool, Ian. Having a real seat would be great! Eventually we need to sort out who has H shifters. Would be fun to set something casual up just for the hell of it. I love mine, but don't get to use it as much as I'd like. Thanks, dude! The rig itself isn't half bad, but that seat just sucks. After about an hour I start getting sore from sitting in it. It would be fun to do like a street or super car day on one of the point to point tracks, or just a trackday type thing in general. Something along those lines sounds like a good time Get one of those orthopedic pads to sit on, it will help. I have a dislocated tailbone and a jacked up L4 L5. Epidurals and all that and nothing helps. Just lots of Ibuprofen and a pad.lmao |
|
|
|
Post by iang0355 on Apr 11, 2020 15:10:58 GMT
You took the thought right out of my head lol, I was using just a pillow until about a month ago but it puts me up too high. I'm gonna get a seat cushion in the next couple days to try out
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 14, 2020 12:36:54 GMT
HI all, I'd like to share my setup as well: Fanatec wheelbase v1.1 universal hub and R300 steering wheel V3 Pedals A locally made seat, not the sturdiest one but for the price its quite ok. 49" curved TV.  In the future (when my money tree will finally grow) I would like to first upgrade to a rig as I'm pretty happy with the screen and very happy with the wheel and pedals! |
|
